FBP-N01 Nozzles

N01 Sand Blasting Nozzles

Model: FBP-NO1

Standard specifications:

FBP-N01-6

FBP-N01-8

FBP-N01-10

FBP-N01-12

FBP-N01-14

A blast nozzle accelerates the air and abrasive as the mixture exits the end of the hose. The taper and length of the nozzle's inlet and outlet determine the pattern and velocity of the abrasive exiting the nozzle. The composition of the liner material determines its resistance to wear.

The operator inserts the nozzle washer into a contractor-thread nozzle holder and screws in the nozzle, turning it by hand, until it seats firmly against the washer. With all related equipment correctly assembled and tested, the operator points the nozzle at the surface to be cleaned and presses the remote control handle to begin blasting. The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly.

The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.

Advantages:

• Expected life with expendable abrasives is up to 500 hours.

• Durable metal jacket.

• Non-binding contractor threads.

• 42% lighter than tungsten carbide.

Applicable for matching all kinds of sandblast guns.